About Jsdeloria21

JSdeloria21

@Alexandru.Rosca Appreciate the answer you have provided me. Thank you. Regards,

JSdeloria21

Hi Community, I have a question on how to minimize the model size of the client. Recently they ask to have an additional 2 Previous years on the model (which is done already). They added FY2017 and 2018. This reflects on all of their modules which greatly increased their model size. It is currently on 105GB already. But then they ask me to remove the 2017 and 2017 years on some modules that does not need 2017 and 2018. To at least decrease the size of the model (hopefully). I previously encountered time ranges but I have not personally use it yet. Can someone gave me some examples on how to execute the time range (with screen shot if possible). And with this, is it possible to decrease the model size for the meantime.? Hope you can provide some insights on this matter. Regards,

JSdeloria21

嗨，社区，我想询问有关正确的瀑布图表设置的内容。我可能会错过任何事情。请注意最后一个月的本月实际NOI。起点为零。与左侧的基线NOI相同。第一图这是我目前拥有的。下表的最后一行项目不仅是绿色的，而且在起点上也是不正确的。我如何对底部图表进行模式，以使其看起来与顶部图表相同（最后一行项目应为灰色，应与下面的7,726个第一个项目对齐）？下图第二图是第二图的设置，这是源模块。我需要更改这里的任何内容，以便第二个瀑布图的显示方式与第一个图表相同的方式是灰色的，并且与第一行项目具有相同的起点。 Blue print view Hope you can provide some insights on how this is done. Thanks in advance Regards,

JSdeloria21

Hi Community, I had a previous inquiry about a line item disappearing after changing Brands on the selection. So to troubleshoot the issue I tried to duplicate the issue and use a column chart instead to check if the line item in question will disappear as well. As you can see below, the green line item Current Month Actual NOI is present and visible. But when I change Brands. It disappears. As seen below: Same thing when it is in waterfall chart. When I change brands the line item disappears. The value in question from the source module is Current Month Actual NOI = 113.79. Is there a setting on the chart to disable a single line item.? I was told that in a case of percentage waterfall chart may not display that a partial sum of the line items preceding it, no total is displayed. Is it applicable to all graphs, since I selected column graph on the sample above? Hope someone can provide some clarity on the matter. Appreciate your time Thanks and Regards,

JSdeloria21

hi Ryan, Appreciate you taking time in checking on my query. although I have a question to ask. What do you mean by this statement: " Note that if a Waterfall chart uses percentage values, and the end total is a partial sum of the line items preceding it, no total is displayed in the Waterfall chart. Does this mean that there is probably an instance where the waterfall chart itself is removing the line item from the graph.? I am just trying to understand the statement above. the source table does not seem to be in percentage. also the value on the Current Month Actual NOI is valued at 113.79 from the source module. Does this value prompts the waterfall chart to remove the line item on the graph? Hope you can provide some enlightenment on the question. Thanks and Regards,

JSdeloria21

大家好，这是一个瀑布图，以防万一你想知道。谢谢

JSdeloria21

Hi All, Just to add on my end trying to solve the matter. I duplicate the page of the said chart and put it on the Uncategorized part and re publish the chart and it still does the same thing the last line item disappear. This is on another brand. Also on another brand. you can see the Current Month on the right side is visible. And then I go back to the brand where it has a problem. The line item disappears. Hope this will help you to give me some insights on the matter. Regards,

JSdeloria21

Hi All, I have a simple query on a waterfall chart that we have on a client. so we have the waterfall chart and it shows the line items below when selecting a Brand.These are the Line Items showing on the region with the graph (unfortunately I cannot show the entire table since we are under NDC Agreement with the client). this is the correct results. When i select another Brand. The line item Current Month Actual Is there a settings in the NUX where I can turn it on and show the line item. I checked the source module and there is a data. I just checked per month and the line item really does not show on the waterfall chart. also going to include the screen shot of the chart settings if it may help. Any idea on this matter would be greatly appreciated. Also, please provide screenshot (if its not too much trouble). THanks and Regards,

JSdeloria21

嗨，M.Kierepka，感谢您的时间发送给我回馈此消息，如果没有更新，它还可以。再次感谢它，谢谢，

JSdeloria21

你好,这只是一个简单的查询,我想to ask if anyone of you have the link in Anaplan apphub to a sample of a workforce planning model. if you have any pdf or word file with the process flow of any workforce planning that you can share. Thanks in advance and appreciate your time,

JSdeloria21 · ‎04-04-2022

hi Jitendra, Appreciate your feedback on the issue. So change only the summary method to Any and it should work? I will try it and let you know if I have further questions.. THanks and Regards,

JSdeloria21 · ‎04-04-2022

Hi All, I hope this is a simple one, I am not sure if this is possible but hopefully it is. Is there a Conditional Formatting for a Boolean type line item. See details below. The line item Override is on a Boolean format. Since users will tick the box. I was hoping to indicate the entire row of Class2 to have a Conditional formatting. The row is actually a Dimension named vehicle class. I tried creating a Conditional Formatting rule but it does not seem correct. Any feedback is highly appreciated. If possible provide screenshot of the steps. Thanks

JSdeloria21 · 03-01-2022

Hi Misbah, Is there a way to work on this since I dont have an available unit at present. is there a settings in the browser where I can allow the images to be seen. Thanks and Regards,

JSdeloria21 · 03-01-2022

Hi Anaplan, I would like to ask since I have been having this issue since out development phase. I cannot seem to view the images in the Anaplan NUX. At first thew the images in the Anaplan NUX. at this issue since out development phase. I cannot seem to view the images in the NUXe issue was because the images was stored in the sharepoint folder of the client where I currently have issue logging in. but now the images are already stored in the module and not in the sharepoint folder I still cannot view the images/logos on the MR pdf and NUX. Resolution: clear cache on the browser, I reinstalled Chrome and Firefox to ensure to reset all settings to default. In the MR pdf I can only view it once exported to pdf. I turned off my firewall – just in case this is the one causing the problem. But in the NUX even if I export it as pdf it is still blank (see below). Is there any resolution that you can suggest because I am currently tasked to check whether all images/logos of the client is visible on the NUX. And I cannot check it if it is not visible on my side (and the client is very particular on the logos- as it represents their company). The weird thing is that I am the only one not seeing this. My teammates and clients can view them on their end. Is this a known bug in the NUX or is it just my service unit (laptop) that has a problem. This is the view after I export to pdf a page. any feedback would be greatly appreciated, Thanks and Regards,

JSdeloria21 · ‎02-15-2022

您好@timothythomas，感谢您提供一些反馈并抽出时间回答我的查询。感谢致敬，

JSdeloria21 · ‎02-15-2022

hi Community, i would like to ask how to adjust the table in MR in ANaplan. below I have 2 tables linked to the same module only difference is they have different line item. as you can see the table on the right is skipping month while the left table is ok. how do I adjust this. any feedback would be appreciated. THanks and Regards,

JSdeloria21 · ‎02-08-2022

Hi @KirillKuznetsov. Is this going to be done on the source module or in the NUX?? Appreciate the feedback given. THanks

JSdeloria21 · ‎02-07-2022

Hi Community, I would like to ask for any suggestion or recommendation on the requirement below. Any feedback will be greatly appreciated. Requirement: in the MR pdf slide client would want to see 2 graph (Current Year and Previous Year, see below for screenshot). My apologies in advance if I was not able to provide the actual table. Not sure if I can since we have confidentiality agreement with the client. But just to sure and for the sake of presentation. I recreated them for you guys to understand. Column Dimension is Class dimension and TIME (not relevant). So if the user select FY21 on the time page selector automatically the table of the left is the current year (this Is working already) I already sync the page selector to the table and graph. However is it possible to automatically have the 2nd table Previous Year always? Is there a setting that I can select to make sure this table on the right is always previous year? At the moment since we only have data in 2021 I fix the time on the right table and graph to 2020. But when the time comes that they already have a data for 2022. The table on the right should present as 2021 already. Is there any recommendation or suggestion on how to achieve this requirement? Thanks and Regards in advance,

JSdeloria21 · ‎02-07-2022

嗨,我有一个简单的查询希望你们能公关ovide me a step by step process on how to do it. the requirement is that I need to have a time dimension dropdown on the MR pdf slide (see below). this is what I get when I click edit selector. is there an easy way to enable time to display as a drop down selection on the graph? Any feedback is appreciated, THanks

JSdeloria21 · ‎02-04-2022

大家好，我对Nux的MR进行了一些询问。我必须承认我不像你们大多数人那样精通，所以我对此有多个问题。1.如何在顶部选择页面选择上的时间维度？2.底部的传说（用餐，取出等）。如何将其放在图表的顶部？3.如何用黄色亮点删除Y轴上的数字。4.另外，在第一桌上，x轴上有-25？如何将其删除，因为数据没有（ - ）值。6.有没有办法删除此盒子？用户突出显示堆叠的小型对话框

JSdeloria21 · 02-02-2022

嗨，Kirilkuznetsov，感谢您的建议。我尝试了一下，但是这次我无法查看NUX上保存的视图。在选择上不存在保存的视图选项，我不确定我在这里是否做错了。但是我感谢反馈@kirillkuznetsov，谢谢，问候，

JSdeloria21 · 02-02-2022

hi KirilliKuznetsov, I actually save it as default to make sure that I captured it. I did not create any saved views for this one.As seen below. THanks and Regards

JSdeloria21 · 02-02-2022

hi all, I would to ask something that is first time encounter on my part. I created a duplicate module of the source report of the client specifically for creating a customized graph by the client. on the duplicate module i have this pivot but when i try to select a source on the NUX it gives me this view: And the row is wrong as well sorry for the including the row on the screen shot. Am i doing wrong or did I miss something? let me know if you have some feedback it will be much appreciated. Thanks and Regards,

JSdeloria21 · ‎02-01-2022

Hi Manjunath, APpreciate the feedback THanks and Regards,

JSdeloria21 · ‎02-01-2022

大家好，这对你们所有人来说可能都是一个简单的问题，我只是想知道有机会在NUX中创建S Graph类似于堆叠图（不确定它是否是堆叠的样式图，请参见下文样本）。如果我无法向您展示整个桌子，我深表歉意。但是我正在寻找的图与屏幕截图上的图相同。或更接近这一建议的任何建议将不胜感激。感谢致敬，

JSdeloria21 · ‎01-27-2022

hi Manjunath, are you referring to this edit option with the eye? see below there seems to be an option for the show/hide(eye) on the edit option of the module. Thanks and Regards,

JSdeloria21 · ‎01-27-2022

嗨，Antonmineev，感谢对所提交的主题的回应。在您提到的第3个项目上，您要在相关的单元格中钻（在NUX或源模块上钻下此数字？。对于数字1项 - 我遵循客户提供的尺寸，以捕获商店毛利润值的值。感谢您可以就此查询提供一些反馈。再次感谢回复。感谢致敬

JSdeloria21 · ‎01-27-2022

嗨，这个问题已经解决。感谢您的输入。非常感谢。感谢致敬，

JSdeloria21 · ‎01-27-2022

hi All, this issue might already have a solution but this is the first time I encountered this matter. our client send an issue where in the report published in the NUX is blank. Normally my approach would be check the source module to see if this is actually a formula issue that is causing the blank values. below is the source module of the NUX report above. I followed the clients intersection to make sure that we have the same value. as you can see the Gross profit line has the 58.30% on the source module. Do I republish the module in the NUX? or is there a tool in the NUX window where I can make it appear on the NUX.?? i already refreshed the entire page multiple times Hope you can enlighten me on the issue hopefully the resolution you have can be use moving forward. Thanks and Regards,

JSdeloria21 · ‎01-23-2022

Hi Manjunath, THank you very much. Regards,